UNIVERSAL STAKE FOR SCREW-DOWN CASE-BACKS

THANKS to its adhesion, this stake is suitable for all types of case-back. So it will replace all dedicated stake panels

This stake's 2 main assets are the excellent adhesion of the sphere, as well as the adjustable stop used to optimise the contact surface on the case-backs.

This adhesion, associated with a maximum contact surface, makes it possible to screw the case-backs to the final tightening torque. To do so, it is preferable to mount the stake on a press combining vertical movement (ideally a rack or motorised press) with rotation. This enables you to apply a controlled axial force, while applying a rotational movement i.e. tightening.

To optimise the stake's adhesion, you can clean the sphere with clear water, or with an alcohol wipe.  

Reference : 

E319000

Dimensions : 

Ø 66 mm x 58 mm

Weight : 

130 grammes

Technical specifications:

·   Contact sphere:

o   Synthetic material

o   Adhesive

o   Non-scratching

·   Adjustable contact surface: approximately Ø 28 to Ø 50

·   Attachment: Ø 8 mm; anti-rotation width 8 mm

Adjusting the contact surface:

è  Unscrew the small screw using a No. 1.5 Allen key

è  Turn the knob using the arrow and the mark for guidance:

·        Clockwise to increase the contact surface

·        Anti-clockwise to decrease the contact surface

è  Screw in the lock screw using the Allen key

APPLICATIONS:

• OPENING CASE-BACKS IN AFTER-SALES / PRODUCTION
• CLOSING CASE-BACKS TO THE FINAL TORQUE

Advantages:

• Works on solid, engraved and sapphire case-backs
• Non-scratching
• Adaptable to most presses on the market
• Interchangeable sphere

Maintenance advice:

Clean the sphere with clear water or an alcohol wipe

Replacing the sphere:

•  Unscrew the 6 screws using a No. 1.5 Allen key
• Remove the used sphere and fit the replacement sphere, visually lining up the 6 holes with the 6 screws
•  Fully screw in the 6 screws, holding the sphere in position

ACCESSOIRES: