WORKBENCH VACUUM PRESSURE UNIT
Surface decontamination – Without pneumatic control system – Low pressure
a single pump for blowing or suction, without PNEUMATIC CONTROL SYSTEM
Unique on the market, this vacuum pressure unit meets three major requirements of watchmaking:
- It can be used for blowing or suction of particles without the need for a pneumatic network. Both dust and the various particles can be easily removed, giving you clean components.
- With its compact minimalist shape, this pump takes up little space on a workstation.
- This turnkey device is easy to install. It takes just a few minutes to set it up for use.
This innovative pump can be used wherever you want, all you need is a power connection.
The unit has a "pressure" pneumatic outlet and a "vacuum" pneumatic inlet. The pump is activated using the buttons built into the styluses.
The cleanable filter holds sucked up particles, thereby enabling you to recover an inadvertently sucked up part. In addition, this filter protects the pump.
Weight :
Content :
Technical specifications:
· Vacuum flow rate: 20 L/min
· Pressure flow rate: 22 L/min
· Low sound level: approximately 60 dB
· Pipe length: 3 metres per stylus
APPLICATIONS:
· CLEANING AND DECONTAMINATION OF WATCHMMAKING COMPONENTS PRIOR TO FINAL ASSEMBLY
Advantages:
è Compact and silent
è Ergonomic lightweight styluses with flexible pipes
è All-in-one
è Usable without a pneumatic network
Maintenance advice:
Clean the pump filters regularly
Check the connectors and pipes to detect any leaks
Keep the styluses and pipes clean to ensure optimal operation
Recommendations :
The pump will be activated when you press and hold the stylus button.
- If you use a stylus connected to the connector marked "Vacuum", you will activate the suction.
- If you use a stylus connected to the connector marked "Pressure", you will activate the blower.
If you release the button, the pump will stop working.
You have the option of installing your pump up to 2.5 m from your work area, to maintain optimal working comfort.
This product was designed solely for indoor use. The installation environment must be clean and dry.
It is also possible to order an additional stylus kit as an accessory, to control the air inlet and outlet simultaneously (H505000-KS), as well as a customised end-piece.
Cleaning the filter:
It is easy to disconnect the pneumatic pipe plugged into the filter, via the quick-release connectors.
Unscrew the black part on the front of the filter unit.
This enables you to extract the filter.
To empty the particles present in the transparent plastic container, you can first clean it with a microfibre cloth, and then blast it out using the blower stylus.
You can also clean the orange filter.
Remount the filter on the black support, then screw in the assembly, to return the product to working order.
Replacing the filter:
If the filter is no longer usable, it is available as an accessory.
It is easy to disconnect the pneumatic pipe plugged into the filter, via the quick-release connectors.
Unscrew the black part on the front of the filter unit.
This enables you to extract the filter.
Remount the new filter on the black support, then screw in the assembly, to return the product to working order.
Accessories
