THIS SHARPENER CAN BE USED FOR REWORKING PARALLEL-FLANK BLADES, OR FOR THE FULL CUTTING PROCESS
It is essential to have screwdrivers equipped with well-sharpened blades, to ensure a perfect aesthetic finish when assembling movements or other high added-value assemblies.
This machine enables you to customise the blades, perfectly tailored to the screw geometry. Its diamond wheel can be used to sharpen any blade, whatever the material.
The relatively compact footprint of this machine enables it to be installed in the immediate vicinity of the production site. This proximity offers immediate accessibility to watchmakers, to provide optimal assembly conditions.
This machine is simple and safe to use. The fine settings provide very good control of the result, as well as high precision and repeatability.
Each blade reference has two settings to make, height and width of the flat, and the sharpening process comprises two operations.
The user starts the machining process, and the machine works autonomously. The end of the operation is indicated visually.
Once the settings have been made, this same reference can be produced in series.
It takes approximately 5 minutes to set up and machine a reference. For a series of a single blade reference, this time is reduced to approximately 1 minute.
This machine boosts the autonomy and responsiveness of production shops, providing time and money savings, while obtaining blades perfectly suited to their requirements.
This machine is also compatible with a sustainability approach. It enables recycling of damaged blades, thereby avoiding over-consumption
Delivered without a reduction socket or bush (see accessories for the diameters you want)
A102200: sharpener; power supply; 1 blade holder; 1 diamond wheel; 1 grinding wheel clamp; 1 blade wrench
• Power supply: 100/240 V 50/60 Hz
• Precision: 0.01 mm
• Repeatability: 0.01 mm
• Diamond wheel, Ø 100 mm
· Parallel blade resharpening
· Parallel blade cutting
Station G (left): Machining the blade tip
Station D (right): Machining the blade flanks
For the sharpening of a Ød blade bit you have to order:
• 1x reducing socket A102600-d
• 2x guide bush A102212-d
Special case: for electric shoulder screwdriver bits (Lecureux style), the diameter is different between the socket (Ø 150) and the bush (Ød)